Surrey Fluid Power - product lines we carry

Products

Bettis Canada: http://www.bettiscanada.com/

Bettis USA: http://www.bettis.com/

	Bettis RPC-Series Bettis RPC-Series pneumatic rack and pinion actuators represent a new generation of valve control, incorporating the latest technologies and materials available to offer a reliable, economical and long lasting product. Specifically designed for quarter-turn applications, the RPC-Series is ideally suited for the operation of plug, butterfly, ball valves, dampers and other 90° turn devices. SFPA stocks in BC. For details see: http://bettis.com/Products/RPC-Series.htm

CB/CBA, HD/T, E, G Series Using the scotch-yoke mechanism this series, described below, produces torque that closely matches the requirements of most quarter-turn valves.	Unlike other methods, such as a crank arm that produces its lowest torque at the start and the end of each stroke, the scotch-yoke produces its highest torque at the start and the end of each stroke, providing maximum torque precisely where it is required to efficiently operate most quarter-turn valves.

	CB/CBA Actuator Series Bettis' CB-Series pneumatic actuators are compact, lightweight and ideally suited for automating ball, butterfly and non-lubricated plug valves, or any quarter- turn (90 degree) rotating mechanism. These efficient, low maintenance actuators, with optional controls, provide a reliable method of operating and confirming valve position for a fully automated process. The CB-Series, available in double-acting and spring-return models, are independently certified to BS 5490: 1977 - IP66 for water ingress protection. For details see: http://bettis.com/Products/CB-Series.htm
HD/T Series
Bettis HD/T-Series pneumatic and hydraulic actuators are ideally suited for operating ball, butterfly, plug valves, dampers and other 90 degree turn devices. The HD/T-Series actuators provide a practical and reliable method for opening and closing valves by remote control without the need for expensive and unnecessary gearing, hydraulic pumps or other motor driven devices. The HD-Series operates at pneumatic pressures up to 250 PSIG (17 BAR) or hydraulic pressures up to 3000 PSIG (207 BAR). The T-Series operates at pneumatic pressures up to 200 PSIG (14 BAR). Consult factory for hydraulic applications. For Details see: http://bettis.com/Products/HD_&_T-Series.htm

	E Series The Bettis E series actuators are used in the Bettis PressureGuard and Gas/Hydraulic Control System, and are proven performers is high and extreme low temperature operation. Custom design and manufacturing is available to meet unique requirements. Bettis' E-Series pneumatic or hydraulic actuators are compact, lightweight and ideally suited for automating ball, butterfly and non-lubricated plug valves, or any quarter- turn (90 degree) rotating mechanism. The E Series is available in single or two cylinders for double acting or single cylinder / Spring Return configurations. Pneumatic pressures from 60-140 PSIG generating torques from 1,270-1,200,000 In-Lb. (start/end stroke) Hydraulic pressures up to 750-1000 PSIG generating torques from 2370 - 1,500,000 In-Lb. (start/end stroke)

G Series The G-Series actuators provide a unique, highly reliable means of operating ball, butterfly, or plug valves, as well as louvers, dampers and other 90 degree rotating mechanisms. In developing the G-Series actuators, Bettis improved a basic concept - the Reaction Bar, by adding our new state-of-the-art Powr-Swivl(tm), replaceable bearings, highly efficient wear and corrosion resistant coating system, and tension rod compressed spring. This enhanced design greatly improves efficiency, reduces wear and extends the actuator's life. The combining of these technologies, enhancements, and superior quality control techniques produced an assembly which became the heart of our new extended service actuators - the G-Series. For details see: http://bettis.com/Products/G-Series.htm

Helical Spline with submersable application

R Series Actuator Bettis' Helical Spline product line provides a unique hydraulically-operated quarter-turn valve actuator with compact overall dimensions, reduced weight and simplicity of design. The balanced, concentric design applies no side/bending forces on the actuator's valve stem, promoting reliable performance. The Helical Spline hydraulic actuators can be provided in double-acting or spring-return configurations. Output torques range to 4,000,000 lb-in. (404,000 Nm) with operating pressures to 3,000 psi (207 bar). The product is ideal for offshore oil and gas applications including subsea, splash zone and topside. For details see: http://www.dantorque.dk/

	EM Series Electric Actuators Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications - ball, butterfly and plug valves; dampers; vents and similar uses. The EM Series offers various switch and positioning options and has various speed / modulation options. Bettis offers five a year Warranty; the best in the industry, we invite you to take a close look. The Model EM-100 actuators offer compactness with a rugged design to develop maximum torque in a small package. Automate quarterturn applications - ball, butterfly and plug valves; dampers and vents. Guaranteed output torques from 140 lb-in to 10,000 lb-in (16 Nm to 1,130 Nm) Female DIN/ISO available for direct valve mounting CSA certified enclosures are offered in both a non-hazardous (type 4) and a combination non-hazardous plus hazardous (type 4 & 7). For details see: http://bettis.com/Products/TorqPlus.htm

CONTROLS: SFPa offers visual or sensor feedback (switches) and positioning equipment for all Bettis actuators. SFPa will assist you in designing your system requirements but can also take existing sensors such as proximity switches, and mount them in Bettis enclosures, which offer a variety of payload options:
Bettis QEC Controller The Quarter Turn Electronic Controller (QEC) is a rugged optically encoded position controller suitable for on-off valve applications. It is a micro - controller based system which provides improved accuracy for position monitoring, eliminates problems associated with the mechanical adjustment of micro-switch cams and allows digital communication with multiple units over a single cable. Features: Energize or de-energize solenoid valves to open or close line valves Stop valve travel at any position CSA certified Class 1, Groups C & D for use in hazardous locations Absolute position encoder accurate to 1° -40°C to +85°C operating temperature range Enables up to 32 QEC's to networked, power supply and communication cable connections are run in parallel Communication software runs under Windows 3.1, 95 or 98 Custom programming to suit specific applications available External pushbutton station for remote and local commands Monitors solenoid valve status and available with solenoid valve reset delay Suitable for a variety of analog switchpack options plus GOSwitch proximity solid state switches.

	3R Bettiswitch The Bettiswitch Position Monitor for ¼ turn actuator applications. Offered in direct drive or lever operated configurations, the 3R has two individually adjustable elements. Bettiswitch is UL, CSA or CENELEC listed (for Class 1 GR. C,D locations). Available with two SPDT or DPDT switch options including hermetically sealed, magnetic blowout, and gold alloy contacts. Standard SPDT switches are rated for 15A at 120/240VAC or 5A at 24VDC. Hermetically sealed switches are rated for 1A at 120/240VAC or 5A at 28VDC operation.